Documentos Técnicos
Especificações
Brand
Renesas ElectronicsProduct Type
RF Switch
Switching Speed
500ns
Port to Port Isolation
39dB
Maximum Insertion Loss
1dB
Contact Configuration
SPST
Output Impedance
50Ω
Contact DC Voltage
0.3V dc
Height
0.9mm
Minimum Operating Temperature
-55°C
Length
2mm
Maximum Operating Temperature
105°C
Maximum Frequency
8000MHz
Standards/Approvals
No
Series
F2910
Minimum Frequency
30MHz
Width
2mm
País de Origem
Taiwan, Province Of China
Detalhes do produto
The Renesas Electronics RF switch is a high reliability with low insertion loss and 50Ω absorptive SPST switch designed for a multitude of wireless and RF applications. This device covers a broad frequency range from 30MHz to 8000MHz. In addition to providing low insertion loss and it also deliver excellent linearity and isolation performance while providing a 50Ω termination on RF2 in the isolation mode. It uses a single positive supply voltage supporting either 3.3V or 1.8V control logic.
Informações de estoque temporariamente indisponíveis.
R$ 69.870,00
R$ 23,29 Each (On a Reel of 3000) (Sem VAT)
3000
R$ 69.870,00
R$ 23,29 Each (On a Reel of 3000) (Sem VAT)
Informações de estoque temporariamente indisponíveis.
3000
Documentos Técnicos
Especificações
Brand
Renesas ElectronicsProduct Type
RF Switch
Switching Speed
500ns
Port to Port Isolation
39dB
Maximum Insertion Loss
1dB
Contact Configuration
SPST
Output Impedance
50Ω
Contact DC Voltage
0.3V dc
Height
0.9mm
Minimum Operating Temperature
-55°C
Length
2mm
Maximum Operating Temperature
105°C
Maximum Frequency
8000MHz
Standards/Approvals
No
Series
F2910
Minimum Frequency
30MHz
Width
2mm
País de Origem
Taiwan, Province Of China
Detalhes do produto
The Renesas Electronics RF switch is a high reliability with low insertion loss and 50Ω absorptive SPST switch designed for a multitude of wireless and RF applications. This device covers a broad frequency range from 30MHz to 8000MHz. In addition to providing low insertion loss and it also deliver excellent linearity and isolation performance while providing a 50Ω termination on RF2 in the isolation mode. It uses a single positive supply voltage supporting either 3.3V or 1.8V control logic.