Documentos Técnicos
Especificações
Brand
RS ProProduct Type
Fibre Optic Patch Panel
Connector Type
ST
Number of Ports
24
Number of Populated Ports
24
Panel Type
Sliding
Rack Height
1U
Fibre Type
Multimode
Material
Cold Rolled Steel
Height
44mm
Depth
205mm
Standards/Approvals
RoHS, REACH
Width
482mm
País de Origem
China
Detalhes do produto
The RS PRO fibre optic patch panel makes fibre optic systems more accessible by separating network equipment from the hardwiring. Its supplied with 24 ports containing fibre optic adapters. These are individually labelled and suitable for ST (straight tip) connectors.
Patch cables (shorter cables) can be plugged into the front of the distribution panel and connected with longer wires at the back of the device. The 1U unit is 44.45 mm in height and designed to fit 19-inch racking systems. It features a removable rear plate for easy installation of cables and four standard cable entry points. These accept loose tube, tight buffer, pre-terminated and steel tape armoured cable.
This component has an Ingress Protection rating of IP20 so it's capable of withstanding everyday handling and dust. It meets UL (Underwriters Laboratories) approvals and the European Unions key chemical control regulations. It's multi-mode and handy for business and telecommunications applications.
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
Informações de estoque temporariamente indisponíveis.
R$ 2.182,55
R$ 2.182,55 Each (Sem VAT)
1
R$ 2.182,55
R$ 2.182,55 Each (Sem VAT)
Informações de estoque temporariamente indisponíveis.
1
| Quantidade | Preço unitário |
|---|---|
| 1 - 9 | R$ 2.182,55 |
| 10 - 49 | R$ 1.939,10 |
| 50 - 99 | R$ 1.831,28 |
| 100+ | R$ 1.737,59 |
Documentos Técnicos
Especificações
Brand
RS ProProduct Type
Fibre Optic Patch Panel
Connector Type
ST
Number of Ports
24
Number of Populated Ports
24
Panel Type
Sliding
Rack Height
1U
Fibre Type
Multimode
Material
Cold Rolled Steel
Height
44mm
Depth
205mm
Standards/Approvals
RoHS, REACH
Width
482mm
País de Origem
China
Detalhes do produto
The RS PRO fibre optic patch panel makes fibre optic systems more accessible by separating network equipment from the hardwiring. Its supplied with 24 ports containing fibre optic adapters. These are individually labelled and suitable for ST (straight tip) connectors.
Patch cables (shorter cables) can be plugged into the front of the distribution panel and connected with longer wires at the back of the device. The 1U unit is 44.45 mm in height and designed to fit 19-inch racking systems. It features a removable rear plate for easy installation of cables and four standard cable entry points. These accept loose tube, tight buffer, pre-terminated and steel tape armoured cable.
This component has an Ingress Protection rating of IP20 so it's capable of withstanding everyday handling and dust. It meets UL (Underwriters Laboratories) approvals and the European Unions key chemical control regulations. It's multi-mode and handy for business and telecommunications applications.
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
