Documentos Técnicos
Especificações
Brand
RS ProProduct Type
Cable Marker
Maximum Cable Diameter
8mm
Minimum Cable Diameter
3.5mm
Colour
Yellow
Width
9.5mm
Printable
Yes
Material
Polyolefin
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
125°C
Fire Behaviour
Flame Retardant
Standards/Approvals
cULus, RoHS Compliant
Tensile Strength
10.3MPa
País de Origem
China
Detalhes do produto
Use these RS PRO blank cable marker sleeves for labelling electrical wires prior to installation. You can mark multiple labels with a laser printer and then apply them to cables using a heat gun.
The sleeves are made of flame retardant polyolefin, so they won't easily catch fire if there's an electrical fault. It's easy to tear off each sleeve as needed, as they're supplied pre-cut with a dotted line.
These components meet UL 224 (Underwriters Laboratories) standards for safety extruding insulating tubing, meaning they're safe to use in the insulation of electrical wiring. Heat shrink sleeves such as these have good chemical and abrasion resistance, so they're suitable for use in demanding industrial environments.
Informações de estoque temporariamente indisponíveis.
R$ 1.299,20
R$ 1.299,20 1 Box of 250 (Sem VAT)
1
R$ 1.299,20
R$ 1.299,20 1 Box of 250 (Sem VAT)
Informações de estoque temporariamente indisponíveis.
1
| Quantidade | Preço unitário |
|---|---|
| 1 - 4 | R$ 1.299,20 |
| 5+ | R$ 1.253,39 |
Documentos Técnicos
Especificações
Brand
RS ProProduct Type
Cable Marker
Maximum Cable Diameter
8mm
Minimum Cable Diameter
3.5mm
Colour
Yellow
Width
9.5mm
Printable
Yes
Material
Polyolefin
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
125°C
Fire Behaviour
Flame Retardant
Standards/Approvals
cULus, RoHS Compliant
Tensile Strength
10.3MPa
País de Origem
China
Detalhes do produto
Use these RS PRO blank cable marker sleeves for labelling electrical wires prior to installation. You can mark multiple labels with a laser printer and then apply them to cables using a heat gun.
The sleeves are made of flame retardant polyolefin, so they won't easily catch fire if there's an electrical fault. It's easy to tear off each sleeve as needed, as they're supplied pre-cut with a dotted line.
These components meet UL 224 (Underwriters Laboratories) standards for safety extruding insulating tubing, meaning they're safe to use in the insulation of electrical wiring. Heat shrink sleeves such as these have good chemical and abrasion resistance, so they're suitable for use in demanding industrial environments.
