Documentos Técnicos
Especificações
Brand
STMicroelectronicsPower Supply Type
Single
Product Type
Current Sensing Amplifier
Maximum Supply Voltage
18V
Minimum Supply Voltage
2.7V
CMRR - Common Mode Rejection Ratio
80dB
Number of Channels
1
Supply Current
1.8mA
Package Type
SO-8
Pin Count
8
Minimum Operating Temperature
-40°C
GBP - Gain Bandwidth Product
1MHz
Standards/Approvals
RoHS
Series
TSC2
Length
6.2mm
Height
5mm
Automotive Standard
AEC-Q100
Output Type
Analogue Voltage
Maximum Operating Temperature
125°C
País de Origem
Morocco
Detalhes do produto
The STMicroelectronics Current Sense Amplifiers delivers an analog voltage output. It can sense current via a shunt resistor over a wide range of common mode voltages, from 16 to +80 V, whatever the supply voltage is. It integrate an open drain comparator with output latch function and an internal 0.6 V voltage reference connected to its input. The external resistor divider can then set the switching threshold.
Informações de estoque temporariamente indisponíveis.
P.O.A.
Each (Supplied on a Reel) (Sem VAT)
Embalagem de Produção (Bobina)
2
P.O.A.
Each (Supplied on a Reel) (Sem VAT)
Informações de estoque temporariamente indisponíveis.
Embalagem de Produção (Bobina)
2
Documentos Técnicos
Especificações
Brand
STMicroelectronicsPower Supply Type
Single
Product Type
Current Sensing Amplifier
Maximum Supply Voltage
18V
Minimum Supply Voltage
2.7V
CMRR - Common Mode Rejection Ratio
80dB
Number of Channels
1
Supply Current
1.8mA
Package Type
SO-8
Pin Count
8
Minimum Operating Temperature
-40°C
GBP - Gain Bandwidth Product
1MHz
Standards/Approvals
RoHS
Series
TSC2
Length
6.2mm
Height
5mm
Automotive Standard
AEC-Q100
Output Type
Analogue Voltage
Maximum Operating Temperature
125°C
País de Origem
Morocco
Detalhes do produto
The STMicroelectronics Current Sense Amplifiers delivers an analog voltage output. It can sense current via a shunt resistor over a wide range of common mode voltages, from 16 to +80 V, whatever the supply voltage is. It integrate an open drain comparator with output latch function and an internal 0.6 V voltage reference connected to its input. The external resistor divider can then set the switching threshold.