Documentos Técnicos
Especificações
Brand
STMicroelectronicsProduct Type
Communication & Wireless Development Tool
Kit Classification
Evaluation Board
RF Technology
RF Transceiver
Technology
SPIRIT1
For Use With
STM32 Nucleo Boards
Featured Device
SPSGRF-915
Kit Name
X-NUCLEO-IDS01A5
Maximum Frequency
915MHz
Interface Type
SPI
Standards/Approvals
FCC and IC Certified (FCC ID:S9NSPSGRF,IC:8976C-SPSGRF), RoHS
Detalhes do produto
RF Expansion Boards based on SPSGRF-915 and SPSGRF-868 Modules for STM32 Nucleo, STMicroelectronics
The evaluation boards are based on the SPIRIT1 RF module SPSGRF-xxx, a Low data rate, low power Sub 1GHz transceiver. The SPSGRF-915 module operates in the 915MHz and the SPSGRF-868 module operates in the 868MHz ISM band. They are FCC certified and IC certified. It is compatible with the ST Morpho and Arduino UNO R3 connector layout. The board interfaces with the STM32 microcontroller via SPI connections and GPIO pins. The user can change some of the GPIOs by mounting or removing the resistors.
Informações de estoque temporariamente indisponíveis.
R$ 201,65
R$ 201,65 Each (Sem VAT)
1
R$ 201,65
R$ 201,65 Each (Sem VAT)
Informações de estoque temporariamente indisponíveis.
1
Documentos Técnicos
Especificações
Brand
STMicroelectronicsProduct Type
Communication & Wireless Development Tool
Kit Classification
Evaluation Board
RF Technology
RF Transceiver
Technology
SPIRIT1
For Use With
STM32 Nucleo Boards
Featured Device
SPSGRF-915
Kit Name
X-NUCLEO-IDS01A5
Maximum Frequency
915MHz
Interface Type
SPI
Standards/Approvals
FCC and IC Certified (FCC ID:S9NSPSGRF,IC:8976C-SPSGRF), RoHS
Detalhes do produto
RF Expansion Boards based on SPSGRF-915 and SPSGRF-868 Modules for STM32 Nucleo, STMicroelectronics
The evaluation boards are based on the SPIRIT1 RF module SPSGRF-xxx, a Low data rate, low power Sub 1GHz transceiver. The SPSGRF-915 module operates in the 915MHz and the SPSGRF-868 module operates in the 868MHz ISM band. They are FCC certified and IC certified. It is compatible with the ST Morpho and Arduino UNO R3 connector layout. The board interfaces with the STM32 microcontroller via SPI connections and GPIO pins. The user can change some of the GPIOs by mounting or removing the resistors.
