Documentos Técnicos
Especificações
Brand
United AutomationProduct Type
Driver Module
Mount Type
DIN Rail
Pin Count
9
Minimum Operating Temperature
0°C
Maximum Operating Temperature
65°C
Standards/Approvals
European Low Voltage Directive, EN61010-1, EN 50 081 part 2, European EMC Directive, EN61000-6-2
Series
DFMC36
Automotive Standard
No
Detalhes do produto
The DMFC-36 module has been designed to offer Phase-Angle or Burst Fire Control in firing a thyristor assembly or complete thyristor controller for driving resistive loads. In Single-Cycle or Dual-Cycle mode, these modules use the fastest burst rates possible, providing very accurate control and minimising Harmonic distortion & Flicker within the system.
The number of complete mains cycles during fixed repeating periods (typically 1 to 10 seconds) is varied, thus altering the duty cycle or on-/off-time ratio. Trigger pulses coincide with the zero-crossing times of the mains supply thus ensuring no RFI is produced when using resistive loads.
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
Informações de estoque temporariamente indisponíveis.
R$ 6.401,62
R$ 6.401,62 Each (Sem VAT)
1
R$ 6.401,62
R$ 6.401,62 Each (Sem VAT)
Informações de estoque temporariamente indisponíveis.
1
| Quantidade | Preço unitário |
|---|---|
| 1 - 2 | R$ 6.401,62 |
| 3+ | R$ 6.382,92 |
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
Documentos Técnicos
Especificações
Brand
United AutomationProduct Type
Driver Module
Mount Type
DIN Rail
Pin Count
9
Minimum Operating Temperature
0°C
Maximum Operating Temperature
65°C
Standards/Approvals
European Low Voltage Directive, EN61010-1, EN 50 081 part 2, European EMC Directive, EN61000-6-2
Series
DFMC36
Automotive Standard
No
Detalhes do produto
The DMFC-36 module has been designed to offer Phase-Angle or Burst Fire Control in firing a thyristor assembly or complete thyristor controller for driving resistive loads. In Single-Cycle or Dual-Cycle mode, these modules use the fastest burst rates possible, providing very accurate control and minimising Harmonic distortion & Flicker within the system.
The number of complete mains cycles during fixed repeating periods (typically 1 to 10 seconds) is varied, thus altering the duty cycle or on-/off-time ratio. Trigger pulses coincide with the zero-crossing times of the mains supply thus ensuring no RFI is produced when using resistive loads.
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
