Documentos Técnicos
Especificações
Brand
RS ProNumber of Poles
3
Product Type
Isolator Switch
Mount Type
Panel Mount
IP Rating
IP65
Electrical Phase
3
Handle Colour
Red
Terminal Type
Screw
Auxiliary Contacts Available
No
Series
LB
Switching Current
40A
Minimum Operating Temperature
-25°C
Switching Power
45kW
Padlock Compatibility
Yes
Switching AC Voltage
750V ac
Maximum Operating Temperature
40°C
Depth
70mm
Length
125mm
Hazardous Area Certification
No
Standards/Approvals
IEC, EN, UL, RoHS
Width
100mm
País de Origem
India
Detalhes do produto
This Panel Mount Non- fused isolator switch from our high-quality own brand RS PRO is designed for use with low voltage switchgear such as power distribution, load isolation and motor start/stop.
Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary to disconnect or isolate a circuit.
This type of isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or isolates a circuit through the rotation of the rotary handle and locking ring. This type of non-fused isolator switch will be found isolating circuit breakers, transmission lines, transformers and a multitude of other applications.
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
UL, CSA
Informações de estoque temporariamente indisponíveis.
R$ 694,16
R$ 694,16 Each (Sem VAT)
1
R$ 694,16
R$ 694,16 Each (Sem VAT)
Informações de estoque temporariamente indisponíveis.
1
| Quantidade | Preço unitário |
|---|---|
| 1 - 4 | R$ 694,16 |
| 5 - 9 | R$ 684,43 |
| 10+ | R$ 664,57 |
Documentos Técnicos
Especificações
Brand
RS ProNumber of Poles
3
Product Type
Isolator Switch
Mount Type
Panel Mount
IP Rating
IP65
Electrical Phase
3
Handle Colour
Red
Terminal Type
Screw
Auxiliary Contacts Available
No
Series
LB
Switching Current
40A
Minimum Operating Temperature
-25°C
Switching Power
45kW
Padlock Compatibility
Yes
Switching AC Voltage
750V ac
Maximum Operating Temperature
40°C
Depth
70mm
Length
125mm
Hazardous Area Certification
No
Standards/Approvals
IEC, EN, UL, RoHS
Width
100mm
País de Origem
India
Detalhes do produto
This Panel Mount Non- fused isolator switch from our high-quality own brand RS PRO is designed for use with low voltage switchgear such as power distribution, load isolation and motor start/stop.
Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary to disconnect or isolate a circuit.
This type of isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or isolates a circuit through the rotation of the rotary handle and locking ring. This type of non-fused isolator switch will be found isolating circuit breakers, transmission lines, transformers and a multitude of other applications.
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
UL, CSA
